Device Information - Cisco 7800 Series Administration Manual

Device Information

a) Search for the phone in Cisco Unified Communications Manager Administration by choosing Device >
Phone. Phones that register with Cisco Unified Communications Manager display the IP address on the
Find and List Phones window and at the top of the Phone Configuration window.
b) On the phone, press Applications
then scroll to the IP Address field.
Step 2
Open a web browser and enter the following URL, where IP_address is the IP address of the Cisco IP Phone:
http://<IP_address>
Device Information
The Device Information area on a phone web page displays device settings and related information for the
phone. The following table describes these items.
Note
Some of the items in the following table do not apply to all phone models.
To display the Device Information area, access the web page for the phone, and then click the Device
Information hyperlink.
Table 33: Device Information Area Items
Item
Service mode
Service domain
Service state
MAC Address
Host Name
Phone DN
App Load ID
Boot Load ID
Version
Hardware Revision
Serial Number
Model Number
Message Waiting
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
170
and select Admin Settings > Network Setup > IPv4 Setup, and
Description
The service mode for the phone.
The domain for the service.
The current state of the service.
Media Access Control (MAC) address of the phone.
Unique, fixed name that is automatically assigned to
the phone based on the MAC address.
Directory number that is assigned to the phone.
Identifies the application load version.
Indicates the boot load version.
Identifier of the firmware that is running on the phone.
Revision value of the phone hardware.
Unique serial number of the phone.
Model number of the phone.
Indicates whether is a voice message is waiting on
the primary line for this phone.
Cisco IP Phone Troubleshooting