Schedule Power Save For Cisco Ip Phone - Cisco 7800 Series Administration Manual

Cisco IP Phone Administration

Schedule Power Save for Cisco IP Phone

To conserve power and ensure the longevity of the phone screen display, you can set the display to turn off
when it is not needed.
You can configure settings in Cisco Unified Communications Manager Administration to turn off the display
at a designated time on some days and all day on other days. For example, you may choose to turn off the
display after business hours on weekdays and all day on Saturdays and Sundays.
Note The Cisco IP Phone 7811 does not support Power Save.
You can take any of these actions to turn on the display any time it is off:
• Press any button on the phone.
• Lift the handset.
When you turn the display on, it remains on until the phone has remained idle for a designated length of time,
then it turns off automatically.
For more information, see
Procedure
Step 1 In Cisco Unified Communications Manager Administration, select Device > Phone.
Step 2
Locate the phone that you need to set up.
Step 3 Navigate to the Product Specific Configuration area and set the following fields:
• Days Display Not Active
• Display On Time
• Display On Duration
• Display Idle Timeout
Table 23: PowerSave Configuration Fields
Field
Days Display Not Active
The phone takes the action designated by that button in addition to turning on the display.
Product Specific Configuration, on page 106
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Schedule Power Save for Cisco IP Phone
Description
Days that the display does not turn on automatically
at the time specified in the Display On Time field.
Choose the day or days from the drop-down list. To
choose more than one day, Ctrl-click each day that
you want.
121