Cisco 7800 Series Administration Manual page 71

Cisco IP Phone Installation
The device with its default settings is added to the Cisco Unified Communications Manager database.
For information about Product Specific Configuration fields, see the "?" Button Help in the Phone
Configuration window.
Note
c) In the Protocol Specific Information area of this window, choose a Device Security Profile and set the
security mode.
Note
d) In the Extension Information area, check the Enable Extension Mobility check box if this phone supports
Cisco Extension Mobility.
e) Click Save.
Step 9 Select Device > Device Settings > SIP Profile to set up parameters such as Multilevel Precedence and
Preemption (MLPP).
Step 10
Select Device > Phone to configure directory numbers (lines) on the phone by completing the required fields
in the Directory Number Configuration window.
a) Find the phone.
b) In the Phone Configuration window, click Line 1 on the left pane of the window.
c) In the Directory Number field, enter a valid number that can be dialed.
Note
d) From the Route Partition drop-down list, choose the partition to which the directory number belongs. If
you do not want to restrict access to the directory number, choose <None> for the partition.
e) From the Calling Search Space drop-down list, choose the appropriate calling search space. The value
that you choose applies to all devices that are using this directory number.
f) In the Call Forward and Call Pickup Settings area, choose the items (for example, Forward All, Forward
Busy Internal) and corresponding destinations to which calls should be sent.
Example:
If you want incoming internal and external calls that receive a busy signal to forward to the voice mail
for this line, check the Voice Mail check box next to the Forward Busy Internal and Forward Busy External
items in the left column of the Call Pickup and Call Forward Settings area.
g) In the Line 1 on Device pane, configure the following fields:
• Location
• Owner User ID
If you want to add both the phone and user to the Cisco Unified Communications Manager
database at the same time, see the documentation for your particular Cisco Unified
Communications Manager release.
Choose a security profile based on the overall security strategy of the company. If the phone
does not support security, choose a nonsecure profile.
This field should contain the same number that appears in the Telephone Number field in the
End User Configuration window.
• Display (Internal Caller ID field): You can enter the first name and last name of the user of this
device so that this name displays for all internal calls. Leave this field blank to have the system
display the phone extension.
• External Phone Number Mask: Indicate phone number (or mask) that is used to send Caller ID
information when a call is placed from this line. You can enter a maximum of 24 numeric and "X"
characters. The Xs represent the directory number and must appear at the end of the pattern.
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Set Up a Cisco IP Phone
57