Cisco 7800 Series Administration Manual page 107

Cisco IP Phone Administration
Feature
Conference
Confidential Access Level (CAL)
Configurable Energy Efficient
Ethernet (EEE) for Port and Switch
Configurable RTP/sRTP Port Range
CTI Applications
Device Invoked Recording
Directed Call Park
Description and More Information
Allows a user to talk simultaneously with multiple parties by calling each participant
individually. Conference features include Conference and Meet Me.
Allows a noninitiator in a standard (ad hoc) conference to add or remove participants; also
allows any conference participant to join together two standard conferences on the same line.
The Advance Adhoc Conference service parameter, disabled by default in Cisco Unified
Communications Manager Administration, allows you to enable these features.
Be sure to inform your users whether these features are activated.
Note
Controls whether a call can be completed based on the CAL configuration in the Cisco Unified
Communications Manager.
When CAL is enabled, the user sees information about the call in a CAL message. The phone
displays the CAL message for the duration of the call. If a call fails due to an incompatible
CAL, the phone displays a failure message. You set up the failure message that the user sees.
Provides a method to control EEE functions on personal computer port and switch port by
enabling or disabling EEE. The feature controls both type of ports individually. The default
value is Enabled.
See Energy Efficient Ethernet for Port and Switch,
106.
Provides a configurable port range (2048 to 65535) for Real-Time Transport Protocol (RTP)
and secure Real-Time Transport Protocol (sRTP).
The default RTP and sRTP port range is 16384 to 32764.
You configure the RTP and sRTP port range in the SIP Profile.
See Set Up RTP/sRTP Port Range, on page
A computer telephony integration (CTI) route point can designate a virtual device to receive
multiple, simultaneous calls for application-controlled redirection.
Provides end users with the ability to record their telephone calls via a softkey.
In addition administrators may continue to record telephone calls via the CTI User Interface.
See Device Invoked Recording,
Allows a user to transfer an active call to an available directed call park number that the user
dials or speed dials. A Call Park BLF button indicates whether a directed call park number is
occupied and provides speed-dial access to the directed call park number.
Note If you implement Directed Call Park, avoid configuring the Park softkey. This
prevents users from confusing the two Call Park features.
See call park information in the documentation for your particular Cisco Unified
Communications Manager release.
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
Telephony Features for the Cisco IP Phone
Product Specific Configuration, on page
134.
Product Specific Configuration, on page 106.
93