System > System Settings - ProMinent DULCOMARIN 3 Compact Assembly And Operating Instructions Manual

Operating the device
9.2.3.2 Setting units
9.2.3.3 Reduce brightness after:
9.2.3.4 Colour scheme
9.2.3.5 Screen lock
9.2.3.6 New "Home" display
9.2.3.7 Activate return to the menu
9.2.3.8 Activating maintenance timer
9.2.4 System > System settings
74
Here you can set which units are to be used.
The following units are available:
Temperature in °C or °F
n
ppm or mg/l
n
Here you can set how long after a period without user intervention
the display brightness is reduced. Adjust the value in minutes to
your requirements.
Here you can set a different colour scheme, e.g. to suit your inte‐
rior.
Here you can set when the screen lock is to be enabled. Adjust the
value in seconds to your requirements.
Here you can set which display appears when you press the Home
button.
'Activate return to the menu' menu item is disabled, use the
If the
small arrow (one level higher) to go back to the previous menu
level.
If you have opened the sidebar (Home, Log out, Menu etc.), you
cannot use (one level higher) to go back to the sidebar menu.
'Activate return to the menu' menu item is enabled, use the
If the
small arrow (one level higher) to go back to the sidebar.
Here you can set when a display should appear indicating who
needs to maintain your system. Here you can save the contact
details of your service partner.
In this menu item, you can adjust or run the following submenus.
When doing so, note that the menu item required only becomes
visible once you scroll down or up in the menu navigation. If an OK
button isn't displayed, the set values are saved as soon as the
menu is exited.