Network - ProMinent DULCOMARIN 3 Compact Assembly And Operating Instructions Manual

9.2.4.1 Unit settings
Number of pools
9.2.4.2 System names
9.2.4.3 Defining pool name
9.2.4.4 System functions
Restart
Start update
Restarting application

9.2.5 Network

LAN
DHCP client or DHCP server
Wi-Fi
Here you can set the number of pools which your device is to con‐
trol. Up to 16 pools are possible.
Here you can enter the names of your system,
ming pool in hotel" or "Town swimming pool".
Here you can define the names of your pools, such as children's
pool, therapy pool, competition pool etc.
Here you can restart the system, all set values and functions are
retained. This has the same function as restarting the operating
system on a PC.
Ä Chapter 16 'Software update' on page 102
Here you can restart the respective application. This has the same
function as restarting an application program (e.g. Word) on a PC.
You can adjust or run the following sub-items in this menu item:
Here you can enter the LAN parameters. You need to use
[Cancel] to abort.
confirm or
Ä Chapter 7.3 'LAN interface' on page 69
The Dynamic Host Configuration Protocol (DHCP) is a communica‐
tion protocol used in computer technology. It allows the network
configuration to be assigned to clients by a server.
DHCP enables connected clients to integrate into an existing net‐
work without the network interface having to be configured man‐
ually. The information needed, such as IP address, network mask,
gateway, name server (DNS) and other settings, are assigned
automatically provided the client's operating system supports this.
Here you can set whether the DHCP is to be enabled and so,
whether it is enabled as client or server.
Here you can enter the Wi-Fi parameters. You need to use
[Cancel] to abort.
confirm or
Ä Chapter 7.4 'Wi-Fi interface (optional)' on page 70
Operating the device
'such as' "Swim‐
[OK] to
[OK] to
75