Dimensioning/ Arrangement Of Threaded Connectors - ProMinent DULCOMARIN 3 Compact Assembly And Operating Instructions Manual

Assembly and installation

6.3.1 Dimensioning/ arrangement of threaded connectors

33
Fig. 23: Dimensioning/ arrangement of threaded connectors
I. Bleeding (must not be removed or sealed)
II. Blanking plug
Tab. 4: Individual parts of threaded cable connector set M20 DCPa. Part number: 1092176
Name
Threaded cable connectors, M20x1.5, (5-13) 9005 V0
Sealing ring, M20/4x, Ø5
Sealing ring M20/2x, Ø4
Sealing ring M20/2x, Ø6
Sealing stopper, Ø4 mm, PA, red
Sealing stopper, Ø5 mm, PA, red
Sealing stopper, Ø6 mm, PA, red
36
(4x33=)132
Remove the blind plugs on the device and insert the appro‐
priate threaded cable connectors. Use the appropriate
sealing inserts depending on the cable used. The appropriate
threaded cable connectors form part of the device's scope of
delivery. The individual parts are specified in detail here
Ä Tab. 4 'Individual parts of threaded cable connector set
M20 DCPa. Part number: 1092176' on page 36 .
CAN
I.
(4x33=)132
33
Quantity in parts Part number
10 1092175
5 1045172
5 1045173
5 1045194
4 1092174
4 1092122
4 1092123
USB
II.
A2580