Can Construction - ProMinent DULCOMARIN 3 Compact Assembly And Operating Instructions Manual

6.5 CAN construction

If using M12 plug connectors provided by the customer, it is
n
essential that suitable cable end sleeves are used and that the
braid is connected in the plugs with protection against short cir‐
cuits.
Sections of more than 50 m should be produced using rolled
n
goods (Li02YSCY).
If routing bus cables along with live cables, note the rules
n
relating to the accumulation of cables (DIN VDE 0298 Part 4).
If routing bus cables along with live cables, rolled goods
n
(Li02YSCY) should be used.
User qualification, electrical installation: electrical technician
n
Ä Chapter 1.5 'User qualification' on page 10
General knowledge of CAN bus (Controller Area Network) is
required in order to understand the construction. Furthermore, the
planning and use of measuring and control technology and the
CAN bus (Controller Area Network) requires technical specialist
knowledge, which is not communicated in this document.
Assembly and installation
63