ICP DAS USA M-7060 Quick Start Manual

M-7060
4-channel Digital Input and 4-channel Relay
Output Data Acquisition Module
Quick Start Guide
Product Website:
https://www.icpdas-usa.com/m_7060_m_7060d
http://www.icpdas-usa.com/dcon_utility_pro.html
1. Introduction
The 7060 series provides 4 digital input channels, 2 Form A and 2 Form C signal relay output
channels, while the M-7060P provides 4 digital input channels, 2 Form A and 2 Form C power
relay output channels. All digital input channels can be used as 16-bit counters. In addition, the
digital input channels can be selected either as sink- or source-type via wire connections. The
"D" versions of the 7060 series provide eight LED indicators that can be used to monitor the
status of the digital input and relay output. The "M" versions of the 7060 series support both the
Modbus RTU and DCON protocols, which can be configured via software. There are also
options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-
module isolation are also provided to enhance noise protection capabilities in industrial
environments. The 7060 series is the ideal solution for small signal switching applications, while
the M-7060P is the perfect solution for high power applications.
2. Terminal Assignment
M‐7060 4‐channel DI and 4‐channel Relay Output DAQ Module
‐ QuickStart (Mar/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1