Table of Contents
Advertisement
watchdog timeout has occurred, the digital
output channel s are set to safe value, and the
digital output value that was sent is ignored.
There will be no response if the command syntax is
incorrect, there is a communication error, or there is
no module with the specified address.
Examples:
Command:#021001
Response:>
Sets DO0 to on.
Command:#021401
Response:>
Command:#021301
Response:>
Sets DO3 to on.
Related Commands:
Section 2.3 #AA00(Data)、2.4 #AA0A(Data)
2.6#AAAcDD、2.11 $AA6、2.19 @AA
2.20 @AA(Data)
M-7065 User's Manual Ver2.0, Dec. /200 8 ---33
Advertisement
Table of Contents
