Aa(Data) - ICP DAS USA M-7065 User Manual

2.20 @AA(Data)

Description:
Sets the digital output channels.
Syntax:
@AA(Data)[CHKSUM](CR)
@ Delimiter character
AA Address of the module to be set (00 to FF)
(Data) Data to be written to the digital output
channels.
Bit 0 of the value corresponds to DO0 and
bit 1 of the value corresponds to DO1, etc.
When the bit is 1, it denotes that the
digital output channel is on, and 0 denotes
that the digital output channel is off.
Response:
Valid Command:
Invalid Command:
Ignored Command: 
> Delimiter for a valid command.
? Delimiter for an invalid command.
! Ignored Delimiter character
M-7065 User's Manual Ver2.0, Dec. /200 8 ---64
>[CHKSUM](CR)
?AA[CHKSUM](CR)