ICP DAS USA M-7016 Quick Start Manual

M-7016
2-channel Strain Gauge Voltage Input &
Current Input Data Acquisition Module
Quick Start Guide
Product Website:
https://www.icpdas-usa.com/m_7016d
http://www.icpdas-usa.com/dcon_utility_pro.html
1. Introduction
The M-7016 supports full-bridge strain gauges and provides 2 Analog Input channels, 1
excitation voltage output channel, 1 Digital Input channels and 4 Digital Output channels.
The module provides a programmable input range (±15 mV, ±50 mV, ±100 mV, ±500
mV, ±1 V, and ±2.5 V) and each Analog Input channel can be individually configured.
Excitation voltage output can be in the range of 0 ~ +10 V, with a 40 mA driving
efficiency. Digital Output channels can also be set as high or low alarm outputs. The M-
7016 supports both the Modbus RTU and DCON protocols, which can be configured via
software, and all hardware specifications are the same as the I-7016.
2. Terminal Assignment
M-7016 2-ch Strain Gauge Voltage & Current Input DAQ Module - QuickStart (May/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1