Table of Contents
Advertisement
2.15 $AALS
Description:
Reads the status of the latched digital input channels.
Syntax:
$AALS [CHKSUM](CR)
$
Delimiter character
AA
Address of the module to be set (00 to FF)
L
Command to read the latched status
S
0 : read the low latched status
1 : read the high latched status
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
!
Delimiter for a valid command.
?
Delimiter for an invalid command.
AA
Address of the responding module (00 to FF)
(Data)
Status of the latched digital input
channels, a four- digit hexadecimal value
followed by 00. See Section 1.2 for
details.
M-7065 User's Manual Ver2.0, Dec. /200 8 ---53
!(Data)[CHKSUM](CR)
Advertisement
Table of Contents
