Aatnn - ICP DAS USA M-7065 User Manual

2.25 ~AATnn

Description:
Sets the soft INIT timeout value.
Syntax:
~AATnn [CHKSUM](CR)
~ Delimiter character
AA Address of the module to be set (00 to FF)
T Command to set the Sort INIT timeout
value
nn Two hexadecimal digits representing the
time out value in seconds.The maximum
timeout value is 60 seconds.
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter for a valid command.
? Delimiter for an invalid command.
AA Address of the responding module
There will be no response if the command syntax is
incorrect, there is a communication error, or there is
no module with the specified address.
M-7065 User's Manual Ver2.0, Dec. /200 8 ---75
!AA[CHKSUM](CR)