ICP DAS USA M-7065 User Manual page 12

Setting up and testing the module
1. After installing the DCON Utility, there will be a shortcut icon for the DCON
Utility located on the Windows desktop. Double click this icon to launch
the DCON Utility to set the module's configuration to fit with your
application. After double clicking the icon, the following screen will be
shown:
The tool bars are used to set the COM port environment, search
The tool bars are used to set the COM port environment, search for
for connected modules, data logs, etc.
connected modules, data logs, etc.
All ICPDAS I/M-7000 modules supported by the
current version of the DCON utility software that
are currently connected to the RS-485 network
will be listed in this area.
M-7065 User's Manual Ver2.0, Dec. /200 8 ---12