Introduction - ICP DAS USA M-7065 User Manual

1. Introduction

The I-7000 series is a family of network data acquisition
and control modules, providing analog-to-digital,
digital-to-analog, digital input/output, timer/counter and
other functions. The modules can be remotely controlled
using a set of commands, which we call the DCON
protocol. Communication between the module and the
host is in ASCII format via an RS-485 bi- directional
serial bus standard. Baud Rates are software
programmable and transmission speeds of up to 115.2
Kbps can be selected.The functionality of the M-7000
series is the same as the I-7000 series, with the exception
that the M-7000 series offers extended support for the
Modbus RTU protocol.
The I-7000 and M-7000 DIO modules support TTL
signal,photo-isolated digital input, AC voltage digital
input, relay contact output, solid-state relay output,
photoMOS output and open-collector output.
M-7065 User's Manual Ver2.0, Dec. /200 8 ---5