Table of Contents
Advertisement
2.29 ~AA2
Description:
Reads the host watchdog timeout value of a module.
Syntax:
~AA0 [CHKSUM](CR)
~
Delimiter character
AA
Address of the module to be set (00 to FF)
2
Command to read the host watchdog timeout
value
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
!
Delimiter for a valid command.
?
Delimiter for an invalid command.
AA
Address of the responding module (00 to
FF)
E
1: the host watchdog is enabled
0: the host watchdog is disabled
VV
Two hexadecimal digits to represent the
timeout value in tenths of a second, for
example, 01 denotes 0.1 seconds and FF
denotes 25.5 seconds.
M-7065 User's Manual Ver2.0, Dec. /200 8 ---82
!AAEVV[CHKSUM](CR)
Advertisement
Table of Contents
