10-channel universal voltage input & current input, thermocouple input module (8 pages)
Summary of Contents for ICP DAS USA M-7069D
Page 1
1. Introduction The M-7069D provides 4 Form A signal relay output channels and 4 Form C signal relay output channels, while the M-7069D provides 4 Form A power relay output channels and 4 Form C power relay output channels. 4 kV ESD, 4 kV EFT and 3 kV surge protection are also provided to enhance noise protection capabilities in industrial environments.
。 Protocol: Modbus RTU 。 Module Address: 01 。 DIO Type: Type 40 。 Baud Rate: 9600 bps M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module - QuickStart (Mar/2018) ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717...
Page 3
The default settings for the module can be found in Section 3. Click OK after selecting the COM port setting. M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module - QuickStart (Mar/2018) ICP DAS USA, Inc. | www.icpdas-usa.com...
Page 4
5. DCON utility pro will search for the selected COM port according the setting previously set. DCON Utility Pro supports DCON and Modbus protocol for all ICPDAS and the others modules. M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module - QuickStart (Mar/2018) ICP DAS USA, Inc. | www.icpdas-usa.com...
Page 5
Section 2 for details. Read data from the input channels: send either the #AA or #AAN command to the module. M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module - QuickStart (Mar/2018) ICP DAS USA, Inc. | www.icpdas-usa.com...
Page 6
8. If user doesn’t know command, user can select Address and ID, it will show some refer commands as below. User can select necessary command to test or debug modules. M-7069D 4-ch Form A Relay and 4-ch Form C Relay DAQ Module - QuickStart (Mar/2018) ICP DAS USA, Inc. | www.icpdas-usa.com...