Table of Contents
Advertisement
2.13 $AACN
Description:
Clears the digital input counter of channel N.
Syntax:
$AACN [CHKSUM](CR)
$
Delimiter character
AA
Address of the module to be set (00 to FF)
C
Command to clear the digital input counter
N
The channel to be cleared (0 to F).
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
!
Delimiter for a valid command.
?
Delimiter for an invalid command.
AA
Address of the responding module (00 to FF)
There will be no response if the command syntax is
incorrect, there is a communication error, or there is
no module with the specified address.
M-7065 User's Manual Ver2.0, Dec. /200 8 ---49
!AA[CHKSUM](CR)
Advertisement
Table of Contents
