Eq (Device Cloud Fqdn); Addressing Commands; Sh (Serial Number High); Sl (Serial Number Low) - Digi XB3-C-A2-UT series User Manual

AT commands
Value
0x00
0x01
0x04
0x05
Default
0x01

EQ (Device Cloud FQDN)

Sets or display the fully qualified domain name of the Remote Manager server.
Range
From 0 through 63 ASCII characters.
Default
my.devicecloud.com

Addressing commands

The following AT commands are addressing commands.

SH (Serial Number High)

The upper digits of the unique International Mobile Equipment Identity (IMEI) assigned to this device.
Parameter range
0 - 0xFFFFFFFF [read-only]
Default
N/A

SL (Serial Number Low)

The lower digits of the unique International Mobile Equipment Identity (IMEI) assigned to this device.
Parameter range
0 - 0xFFFFFFFF [read-only]
Default
N/A

MY (Module IP Address)

Reads the device's IP address. This command is read-only because the IP address is assigned by the
mobile network.
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
Remote Manager
Disabled
Enabled
Disabled
Enabled

Addressing commands

USB direct
Disabled
Disabled
Enabled
Enabled
102