Nb (Parity); Sb (Stop Bits); Ro (Packetization Timeout) - Digi XB3-C-A2-UT series User Manual

AT commands

NB (Parity)

Set or read the serial parity settings for UART communications.
Parameter range
0x00 - 0x02
Parameter
0x00
0x01
0x02
Default
0x00

SB (Stop Bits)

Sets or displays the number of stop bits for UART communications.
Parameter range
0 - 1
Parameter
0
1
Default
0

RO (Packetization Timeout)

Set or read the number of character times of inter-character silence required before transmission
begins when operating in Transparent mode.
RF transmission also starts after 100 bytes (maximum packet size) are received in the DI buffer.
Set RO to 0 to transmit characters as they arrive instead of buffering them into one RF packet.
Set to FF for realtime typing by humans. Also, see
Parameter range
0 - 0xFF (x character times)
Default
3
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
Description
No parity
Even parity
Odd parity
Configuration
One stop bit
Two stop bits
TD (Text
Serial interfacing commands
Delimiter).
106