Debugging - Digi XB3-C-A2-UT series User Manual

Getting started with the XBee Smart Modem Development Kit

Debugging

If you experience problems with the settings in this example, you can load the default settings in
XCTU:
1. On the Configuration toolbar, click the Default button
established by the firmware, and click Yes to confirm.
2. Factory settings are loaded but not written to the device. To write them, click the Write button
on the toolbar.
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
Connect to the ELIZA server
to load the default values
21