Table of Contents
Advertisement
Socket behavior
The
RO (Packetization Timeout)
before being sent to the remote host. The first send opens up a UDP socket used to send and receive
data. Any data received by this socket is sent out the XBee Smart Modem's serial port.
Transparent mode behavior for incoming TCP connections
The
C0 (Source Port)
incoming connections (TCP) and incoming data (UDP) in Transparent mode. SSL is not currently
supported for incoming connections.
When the IP setting is TCP and there is no existing connection to or from the XBee Smart Modem, the
device accepts one incoming connection. Any data received on the connection is sent out the XBee
Smart Modem's serial port. Any data sent to the XBee Smart Modem's serial port is sent over the
connection. If the connection is disconnected, it discards pending data.
Transparent mode behavior for incoming UDP connections
When the
IP (IP Protocol)
Modem's network port specified by
Any data sent to the XBee Smart Modem's serial port is sent to the network destination specified by
the
DL (Destination Address)
unspecified or invalid, the XBee Smart Modem discards data sent to the serial port.
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
Transparent mode behavior for incoming TCP connections
setting provides some control in how the serial data gets packetized
and
IP (IP Protocol)
settings specify the listening port and protocol used for
setting is UDP any data sent from a remote host to the XBee Smart
C0 (Source Port)
and
DE (Destination Port)
is sent out the XBee Smart Modem's serial port.
settings. If the DL and DE settings are
140
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the XB3-C-A2-UT series and is the answer not in the manual?