La (Lookup Ip Address Of Fqdn); Serial Interfacing Commands; Bd (Baud Rate) - Digi XB3-C-A2-UT series User Manual

AT commands
Default
0

LA (Lookup IP Address of FQDN)

Performs a DNS lookup of the given fully qualified domain name (FQDN) and outputs its IP address.
When you issue the command in API mode, the IP address is formatted in binary four byte big-endian
numeric value. In all other cases (for example, Command mode) the format is dotted decimal notation.
Range
Valid FQDN
Default
-

Serial interfacing commands

The following AT commands are serial interfacing commands.

BD (Baud Rate)

Sets or displays the serial interface baud rate for communication between the device's serial port and
the host.
Modified interface baud rates do not take effect until the XBee Smart Modem exits Command mode or
you issue AC (Apply
by clicking the Write module settings button in XCTU.
Parameter range
Standard baud rates: 0x1 - 0x8
Non-standard baud rates: 0x5B9 to 0x3D090 (250,000 b/s)
Parameter
0x0
0x1
0x2
0x3
0x4
0x5
0x6
0x7
0x8
Default
0x3 (9600 b/s)
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
Changes). The baud rate resets to default unless you save it with

Serial interfacing commands

Description
1200 b/s
2400 b/s
4800 b/s
9600 b/s
19200 b/s
38400 b/s
57600 b/s
115200 b/s
230400 b/s
WR command or
105