Table of Contents
Advertisement
Before Mounting Your
System
Unpacking Modules
Allen-Bradley PLCs
Before you mount your 1394 SERCOS interface system make sure you
understand the following:
•
how to store your 1394 before installation
•
how to unpack the system and axis modules
•
the minimum mounting requirements
•
how to determine your mounting hole layout
Storing Your 1394 Before Installation
The 1394 system module and axis modules should remain in their
shipping containers prior to installation. If the equipment is not to be
used for a period of time, store it as follows:
•
Store the equipment in a clean, dry location that is not exposed to
a corrosive atmosphere.
•
Do not store equipment in a construction area.
•
Store within an ambient temperature range of 0 to 65 ° C (32 to
149° F).
•
Store within a relative humidity range of 5 to 95%, noncondensing.
Each 1394 system module ships with the following:
•
One system module
•
One system terminator
•
One installation manual (publication 1394-5.20)
•
Mating power connectors (5 and 10 kW Series C only)
•
Mating I/O and feedback connectors
•
Cable shield grounding clamps
Each 1394 axis module ships with the following:
•
One 1394 axis module
•
TB1 and TB2 connectors
•
Cable shield grounding clamp
•
One 1394 axis module information sheet (publication 1394-5.5)
Installing Your 1394 SERCOS Interface System
1-3
Publication 1394-5.20 — July 2001
Advertisement
Table of Contents
