Table of Contents
Advertisement
Chapter 2
Windows Operating System Overview
Connect Monitor and
Peripherals Before Power-up
Security Settings
28
We recommend that before you apply power to the chassis within which the
Compute module resides, you make all necessary module connections. For
example, connect a monitor to the DisplayPort and peripherals to the USB 3.0
port before you apply power to the module.
Consider the following:
• We recommend that you connect a monitor to the DisplayPort before
you power up the module.
• Because the module has only one USB 3.0 port, we recommend that you
use a USB hub or keyboard/mouse combination so that you can use
both with the module.
The embedded Windows OS on your Compute module is configured per the
Microsoft Security Baseline for Windows 10 v1607 with three exceptions that
are described at
Inactivity Lock and Screen Saver Settings on page
For detailed information on Microsoft Security Baseline for Windows 10
v1607, see:
https://docs.microsoft.com/en-us/windows/device-security/
windows-security-baselines.
Remember the following as you read this section:
• The security setting descriptions provide information that is considered
to be of particular importance regarding how you use your
ControlLogix Compute module.
However, the descriptions are not exhaustive descriptions. For complete
descriptions, see the Microsoft Security Baseline referenced previously.
• If you change the embedded Windows OS default security settings from
the out-of-box conditions, you assume responsibility for any potential
issues that arise as a result of the changes.
Rockwell Automation Publication 1756-UM003C-EN-P - April 2018
30.
Advertisement
Table of Contents
