Before You Begin; Actions - Allen-Bradley 1756-CNB User Manual

54 Configure the System Redundancy Module
−
Workstation
+
Linx Gateways, Ethernet
−
My_Network
−
n, 1756 communication module
−
Backplane, 1756-Ax
xx, 1757-SRM
Publication 1756-UM523F-EN-P - December 2006

Before You Begin

RSLinx software includes and automatically installs the 1757-SRM
System Redundancy Module configuration tool.
Check your revision of the SRM configuration tool when you
IMPORTANT
open it for the first time.
• The revision of tool that you get depends on your version of
RSLinx software.
• Some revisions of the SRM configuration tool are not
compatible with some revisions of a ControlLogix
Redundancy system.
The next section shows you how to see if your revision of the
SRM configuration tool is right for your redundancy system.

Actions

1. Start RSLinx software.
2. From the Communications menu, choose RSWho.
3. Double-click the network to open it.
4. Double-click the communication module in the primary chassis
to show the backplane.
5. Double-click the backplane to see its modules.
6. Right-click the 1757-SRM module and select Module
Configuration.