1-2
Installing Your 1394 SERCOS Interface System
Complying With European
Union Directives
Publication 1394-5.20 — July 2001
If this product is installed within the European Union or EEC regions
and has the CE mark, the following regulations apply.
EMC Directive
This unit is tested to meet Council Directive 89/336 Electromagnetic
Compatibility (EMC) using a technical construction file and the
following standards, in whole or in part:
•
EN 50081-2 EMC - Emission Standard, Part 2 - Industrial
Environment
•
EN 50082-2 EMC - Immunity Standard, Part 2 - Industrial
Environment
•
EN 61800-3 EMC - Adjustable Speed Electrical Power Drive
Systems - Second Environment, Restricted Distribution Class
The product described in this manual is intended for use in an
industrial environment.
To meet CE requirements, the following additions are required:
•
You must run three-phase input wiring in a conduit that is
grounded to the enclosure.
•
You must install a power line filter (Allen-Bradley catalog number
SP-74102-006-01, SP-74102-006-02, SP-74102-006-03 or equivalent
based on system current) between the three-phase input line and
the system module input.
Low Voltage Directive
These units are tested to meet Council Directive 73/23/EEC Low
Voltage Directive. The EN 50178-1 Electronic Equipment for Use in
Power Installations and EN 60204-1 Safety of Machinery-Electrical
Equipment of Machines, Part 1-Specification for General Requirements
standards apply in whole or in part.
Refer to Appendix B of this document for interconnect information.