Conventions Used in this
Manual
1394 Product Receiving and
Storage Responsibility
Allen-Bradley PLCs
The following conventions are used throughout this manual:
•
Bulleted lists such as this one provide information, not
procedural steps.
•
Numbered lists provide sequential steps or hierarchical
information.
•
Words that you type or select appear in bold.
•
When we refer you to another location, the section or
chapter name appears in italics.
You, the customer, are responsible for thoroughly inspecting the
equipment before accepting the shipment from the freight
company. Check the item(s) you receive against your purchase
order. If any items are obviously damaged, it is your
responsibility to refuse delivery until the freight agent has noted
the damage on the freight bill. Should you discover any
concealed damage during unpacking, you are responsible for
notifying the freight agent. Leave the shipping container intact
and request that the freight agent make a visual inspection of
the equipment.
Leave the product in its shipping container prior to installation.
If you are not going to use the equipment for a period of time,
store it:
•
in a clean, dry location
•
within an ambient temperature range of 0 to 65° C (32 to
149° F)
•
within a relative humidity range of 5% to 95%, non-
condensing
•
in an area where it cannot be exposed to a corrosive
atmosphere
•
in a non-construction area
Preface
P-3
Publication 1394-5.20 — July 2001