Setting Up Using The Setup Guide - Canon MF269dw User Manual

Setting Up Using the Setup Guide

When the machine is turned on (
assist you to configure the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the
setting screens are displayed in the following order.
Step 1
Set the language to be displayed on the operation panel screen or in reports, as well as the
country or region where the machine will be used.
Step 2
Adjust the machine's date/time.
Step 3
Set a PIN to access the Remote UI. Because the Remote UI can be used to change the machine
settings from a computer, setting of a PIN is recommended.
Step 4
Turning ON the Machine(P. 107) ) for the first time, the Setup Guide starts up to
Setting the Display Language and the Country or Region
1
Select a language.
2
For a touch panel model, select <Yes>.
3
Select a country or region.
Setting the Date and Time
1
Select a time zone.
What is UTC?
● Coordinated Universal Time (UTC) is the primary time standard by which the
world regulates clocks and time. The correct UTC time zone setting is required
for Internet communications.
2
Enter the date and time, and press <Apply> (
Touch Panel Model
Tap < > or <
the numeric keys. Tap <
5 Lines LCD Model
Use or
numeric keys. Use
Setting the Access Security Measures
1
Select <Yes>.
● If you select <No>, PIN is not set, and the Setup Guide proceeds to step 4.
● You can also set the access security measure of the Remote UI later.
Setting a Remote UI PIN(P. 294)
2
Enter the PIN, and then select <Apply>.
3
Enter the same PIN, and then select <Apply>.
Setting the Wireless LAN
Setting Up
> to move the cursor, and enter the date and time using
> or < > to switch between <AM> or <PM>.
to move the cursor, and enter the date and time using the
or to switch between <AM> or <PM>.
9
2KUS-004
).