7
Select a wireless LAN router.
●
Select the router whose SSID matches the one that you have written down.
If your wireless router is not found
●
Check whether the machine is properly installed and ready to connect to the network.
Settings Problems(P. 468)
8
Enter the network key that you have written down.
●
Enter the network key, and select <Apply>.
●
On how to enter text, see
9
Select <Yes>.
If an error message is displayed during setup
●
Select <Close>, check whether the network key is correct, and return to step 5.
10
Wait until message <Connected.> is displayed.
➠
Wait several minutes until the IP address and other items are set automatically.
Signal strength
●
When more than one wireless router is available for connection, the machine connects to the device
with the strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication).
●
You can set the IP address manually.
●
On the touch panel model, while the machine is connected to the wireless LAN, the Wi-Fi icon is
displayed in the Home screen.
Reducing power consumption
●
You can set the machine to enter <Power Save Mode> based on signals emitted from the wireless router.
<Power Save Mode>(P. 363)
Setting Up
Entering Text(P. 123) .
Setting IP Addresses(P. 31)
Home Screen(P. 111)
25
Installation/