Setting Up Using The Setup Guide - Canon 2438C006 User Manual

Setting Up Using the Setup Guide

When the machine is turned on (
assist you to configure the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the
setting screens are displayed in the following order.
Step 1 Setting the Display Language and the Country or Region
Set the language to be displayed on the operation panel screen or in reports, as well as the
country or region where the machine will be used.
Step 2 Setting the Date and Time
Adjust the machine's date/time.
Step 3 Setting the Access Security Measures
Set a PIN to access the Remote UI. If you do not set a PIN, you cannot use the Remote UI.
Step 4 Setting the Wireless LAN
Setting Up
Turning ON the Machine(P. 84) ) for the first time, the Setup Guide starts up to
1
Select a language.
2
Select a country or region.
1
Select a time zone.
What is UTC?
● Coordinated Universal Time (UTC) is the primary time standard by which the
world regulates clocks and time. The correct UTC time zone setting is required
for Internet communications.
2
Enter the date and time, and press
1
Select <Yes>.
● If you select <No>, this setting required for using the Remote UI is not
configured, and the Setup Guide proceeds to step 4.
2
Read the message that is displayed, and press
3
Select <Yes>.
● If you select <No>, this setting required for using the Remote UI is not
configured, and the Setup Guide proceeds to step 4.
4
Set a Remote UI Access PIN.
● Enter the PIN, and then select <Apply>.
● Enter the same PIN, and then select <Apply>.
● Be sure not to forget the PIN.
● You cannot set a PIN that consists only of zeros, such as "00" or "0000000."
.
18
23FJ-00A
.