Canon MF269dw User Manual page 212

<Ring Start Time>
Enables you to specify the duration during which the machine determines whether an incoming call is a fax or a
telephone call.
<Incoming Ring Time>
Enables you to specify the duration during which an incoming call rings for a telephone call.
<After Ring>
Enables you to specify how the machine operates if you do not pick up the handset while an incoming call is
ringing. Select <End> to disconnect the call or <Receive> to receive an incoming fax.
● If you want to print received documents on both sides of paper:
● If you want to print information, such as reception date and time, at the bottom of received documents:
<RX Page Footer>(P. 398)
● If you want to continue printing even when the amount remaining in the toner cartridge is low:
Print. When Near Cart. Life End>(P. 398)
◼
Using a Telephone to Receive Faxes (Remote Reception)
When you pick up the telephone and get a fax signal, you do not need to go to the machine to receive the fax. Just
enter a specific ID number with the telephone, and you can start receiving the fax.
● When the telephone is not directly connected with the machine, the remote reception function is not
available.
1
When an incoming call rings, pick up the telephone handset.
2
If you hear a beep, enter the ID number for Remote Reception with the telephone.
● For more information about setting the ID number, see
3
Hang up the handset.
LINKS
Checking Status and Log for Sent and Received Documents(P. 216)
Various Receiving Methods(P. 211)
Faxing
<Print on Both Sides>(P. 397)
<Remote RX>(P. 396) .
205
<Continue