Connecting Directly (Access Point Mode) - Canon MF269dw User Manual

Connecting Directly (Access Point Mode)

Even in an environment without a wireless LAN router, using "Access Point Mode," which can directly connect a mobile
device to the machine wirelessly, enables you to connect the mobile device on hand to the machine without difficult
settings.
Preparing for Direct Connection (Access Point Mode)(P. 268)
Connecting Directly (Touch Panel Model)(P. 269)
Connecting Directly (5 Lines LCD Model)(P. 269)
Preparing for Direct Connection (Access Point Mode)
Establish a connection by using Access Point Mode in the following order (only for IPv4 environment).
Specifying the value for time until auto termination
● You can specify the time to automatically establish a disconnection when the direct connection is enabled.
<Time Until Direct Connection Termination>(P. 364)
Connecting multiple mobile devices at the same time
● Configure the machine's SSID and network key arbitrarily. The network key can be left blank.
Point Mode Settings>(P. 364)
Changing the IP address for direct connection
● The IP address for direct connection is set automatically. You can also set any IP address.
Settings for Direct Conn.>(P. 364)
Linking with Mobile Devices
Preparing the mobile device
● Configure settings to connect the mobile device to Wi-Fi.
Put the machine into the connection standby status.
● <Menu> ( ) <Network Settings>
Direct Connection> to <On>.
<Direct Connection Settings>
268
2KUS-05J
set <Use
<Access
<IP Address