When placing originals in the feeder in step 1
When scanning is complete, the faxes are sent.
When placing originals on the platen glass in step 1
When scanning is complete, follow the procedure below.
1
Select the original size.
●
When there is only one page to be scanned, proceed to step 3.
2
Place the next original on the platen glass, and press
●
Repeat this step until you finish scanning all of the pages.
3
Select <Start TX>.
➠
The faxes are sent.
●
If you always want to send faxes with the same settings:
Functions(P. 154)
●
If you want to sound an alarm when the handset is off the hook:
LINKS
Canceling Sending Faxes(P. 202)
Useful Functions When Sending(P. 206)
Checking Status and Log for Sent and Received Documents(P. 216)
Faxing
.
Changing the Default Settings for
<Off-Hook Alarm>(P. 389)
201