<Menu> (
dpi>
<Density Fine Adjustment>
Finely adjust the density. You can specify this setting only when <1200 dpi> is selected in <Resolution>.
<-1>
<0>
<+1>
<Menu> (
density
<Layout>
Specify the page layout settings such as binding position.
<Binding Location>
If you are binding the printouts with a binding tool such as a stapler, use this item to specify whether to bind on
the long or short edge.
<Long Edge>
<Short Edge>
<Menu> (
<Short Edge>
<Long Edge>
Specify this to bind on the long edge of paper.
<Short Edge>
Setting Menu List
)
<Printer Settings>
<Print Quality>
)
<Printer Settings>
<Print Quality>
)
<Printer Settings>
<Layout>
408
<Resolution>
Select <1200 dpi> or <600
<Density Fine Adjustment>
<Binding Location>
Select <Long Edge> or
Specify the