Scanning With Airprint - Canon MF269dw User Manual

Scanning with AirPrint

You can use AirPrint to transfer the data scanned by the machine directly to a Mac.
System Requirements
To scan with AirPrint, you need a Mac with OS X 10.9 or later installed. To scan using TLS, you need a Mac with
OS X 10.11 or later installed.
Network Environment
One of the following environments is required.
● An environment where an Apple device and the machine are connected to the same LAN
● An environment where a Mac is connected to the machine via USB
● For scanning, it is required to set <Use Network Link Scan> to <On>.
Available with AirPrint(P. 274)
● Before scanning, it is required to put the machine into online state. When the auto online function (<Auto
Online for Remote Scan>) is set to <Off>, first put the machine into online state by selecting <Scan>
<Remote Scanner>, then start the procedure for scanning.
● You cannot scan while settings for operations are being made, or while the machine is performing any
operation whatsoever.
Scanning from a Mac
1
Make sure that the machine is turned ON and connected to the Mac.
● For how to make sure of this, see
2
Add the machine to the Mac from [System Preferences]
● If the machine has already been added, this operation is not required.
3
Select this machine from the list of printers in [Printers & Scanners].
4
Click [Scan].
Linking with Mobile Devices
Setting Up the Network Environment(P. 14) .
280
Changing the Setting of Functions
[Printers & Scanners].
2KUS-05S