Canon MF269dw User Manual page 205

● If your machine is connected to a PBX (Private Branch Exchange), select <R> before entering the destination.
If <R> is not available, you need to register the R-key settings.
● If you have entered an incorrect value, press
If a confirmation screen appears
● When <Confirm Entered Fax Number> is set to <On>, the input screen reappears so that you can
confirm the destination (
again.
Sending a fax abroad
● Enter the international access code, the country code, and the fax number to specify the destination.
If you are not able to successfully connect to a recipient, select <Pause> and insert a pause between
numbers.
Adding a destination
● To send a fax to multiple destinations at a time (sequential broadcast), repeat the appropriate steps to
enter all destinations.
● You can also recall previously used destinations.
(Recall Settings)(P. 207)
To delete destinations
If you specified multiple destinations, you can delete destinations as necessary.
1
Select <Destination>
2
Select a destination you want to delete.
● If you specified Group Dial, "XX destination(s)" is displayed. Selecting <Number of Destinations>
displays destinations registered in the group.
3
Select <Remove>
3
Specify the scanning settings as necessary.
Adjusting Image Quality
Scanning 2-Sided Originals
Adjusting Image Quality
Faxing
Confirming the Entered Fax Number(P. 328) ). Enter the destination
<Confirm/Edit>.
<Yes>.
You can select the resolution suitable for your original type. The higher the
resolution is, the clearer the image becomes, but the longer it takes to send.
Selecting Resolution(P. 199)
198
<R-Key Setting>(P. 390)
to clear it.
Recalling Previously Used Settings for Sending