When placing originals on the platen glass in step 1
If you have set 2-sided copying, N on 1 copying, or collating, a screen prompting you to load the next original is
displayed.
1
Select the document size.
●
Only displayed when 2-sided copying is set.
2
Place the next original on the platen glass, and press
●
You can also specify <Density> and <Original Type> separately for each original.
●
Repeat this step until you finish scanning the entire original.
3
Select <Start Copy>/<Start Copying>.
●
When the <Size/Settings Mismatch> or <The memory is full. Scanning will be canceled. Do you want to
print?>/<The memory is full. Scanning will be canceled. Print?> message is shown in the display.
Countermeasures for Each Message(P. 492)
When copying originals with text or images that extend to the edges of the page
●
The edges of the original might not be copied. For more information about the scan margins, see
Unit(P. 533) .
●
If you always want to make copies with the same settings:
Functions(P. 154)
LINKS
Checking the Copying Status and Log(P. 179)
Copying
.
Changing the Default Settings for
176
Main