Checking Status and Log for Sent and Received
Documents
The statuses and communication logs for sent and received fax documents can be checked separately for sending and
receiving.
●
When <Display Job Log> is set to <Off>, you cannot check the communication logs.
Log>(P. 425)
●
The destinations in Manual Sending cannot be checked because they are not displayed.
1
Press
.
2
Select <TX Job> or <RX Job>.
3
Check the statuses and communication logs for sent and received documents.
To check the statuses for sent and received documents
1
Select <Job Status> and select the document whose status you want to check.
➠
Displays detailed information about the document.
●
If you specified multiple destinations, the number of specified destinations is displayed on the
screen. To check the details of specified multiple destinations, select <Number of Destinations>.
To check the communication logs for sent and received documents
1
Select <Job Log> and select the document whose status you want to check.
●
<OK> is displayed when a document was sent or received successfully, and <Error> is displayed when
a document failed to be sent or received because it was canceled or there was some error.
Faxing
216
2KUS-04A
<Display Job