Canon MF269dw User Manual page 397

6 Levels
<Menu> <Fax Settings>
sound <Apply>
<Communication Management Settings>
Specify the communication start speed settings and the R-key settings.
<TX Start Speed>
Adjust the communication start speed in descending order from "33600 bps." This adjustment should be
made when it takes a long time to start sending a fax due to a poor telephone line connection.
<33600 bps>
<14400 bps>
<9600 bps>
<7200 bps>
<4800 bps>
<2400 bps>
<Menu> <Fax Settings>
Start Speed>
<RX Start Speed>
Adjust the communication start speed in descending order from "33600 bps." This adjustment should be
made when it takes a long time to start receiving a fax due to a poor telephone line connection.
<33600 bps>
<14400 bps>
<9600 bps>
<7200 bps>
<4800 bps>
<2400 bps>
<Menu> <Fax Settings>
Start Speed>
<R-Key Setting>
If your machine is connected through a PBX (Private Branch Exchange), it is necessary to
set the access method. You can set the PBX type to <Prefix> or <Hooking>. If you register the outside line
access number to the R-key, you can easily access the outside line.
<PSTN>
<PBX>
Setting Menu List
<Basic Settings>
<Basic Settings>
Select a communication start speed
<Basic Settings>
Select a communication start speed
390
<Off-Hook Alarm> Select the volume of the alert
<Communication Management Settings>
<Communication Management Settings>
<TX
<RX