Checking Status and Log for Scanned Originals
You can check the status and log for scanned originals sent directly from the machine.
●
When <Display Job Log> is set to <Off>, you cannot check the logs for sent documents.
Log>(P. 425)
1
Press
.
2
Select <TX Job>.
3
Check the statuses and logs for sent documents.
To check the statuses for sent documents
1
Select <Job Status> and select the document whose status you want to check.
➠
Displays detailed information about the document.
●
If you specified multiple destinations, the number of specified destinations is displayed on the
screen. To check the details of specified multiple destinations, select <Destination>.
To check the logs for sent documents
1
Select <Job Log> and select the document whose log you want to check.
●
<OK> is displayed when a document was sent successfully, and <Error> is displayed when a document
failed to be sent because it was canceled or there was some error.
➠
Displays detailed information about the document.
When a three-digit number is shown in the case of <Error>
Scanning
248
2KUS-050
<Display Job