Registering the Key and Certificate for Network
Communication
You can obtain the key and certificate, and the CA certificate from a certification authority (CA) for use with the
machine. Install and register the obtained key and certificate file and CA certificate file in this machine using Remote
UI. Check the key and certificate, and CA certificate conditions that are required for the machine in advance (
Management Functions(P. 545) ).
●
For more information about the basic operations to be performed when setting the machine from the
Remote UI, see
Setting Up Menu Options from Remote UI(P. 343) .
1
Start the Remote UI and log in to System Manager Mode.
UI(P. 334)
2
Click [Settings/Registration] on the Portal page.
3
Select [Security Settings]
●
Click [Key and Certificate Settings] to install a key and certificate, or [CA Certificate Settings] to install a CA
certificate.
4
Click [Register Key and Certificate] or [Register CA Certificate].
Deleting a registered key and certificate or CA certificate
●
Click [Delete] on the right of the key and certificate or CA certificate you want to delete
cannot delete the preinstalled CA certificates.
●
A key and certificate cannot be deleted if it is currently used for some purpose, such as when "[TLS]" is
displayed under [Key Usage]. In this case, disable the function or replace the key and certificate before
deleting it.
Disabling or enabling the preinstalled CA certificates
●
Click [Disable] on the right of the preinstalled CA certificate you want to disable. To enable the certificate
again, click [Enable] on the right of the certificate.
5
Click [Install].
Managing the Machine
[Key and Certificate Settings] or [CA Certificate Settings].
315
Starting Remote
Remote UI Screen(P. 335)
2KUS-06F
click [OK]. You