1
Select <Reply To>.
2
Select <Specify from Address Book>.
3
Select a reply-to address.
To specify priority
1
Select <Priority>.
2
Select a priority level.
6
Press
.
➠
Scanning of the original starts.
●
If you want to cancel, select <Cancel>
When placing originals in the feeder in step 1
When scanning is complete, the e-mails are sent.
When placing originals on the platen glass in step 1
When scanning is complete, follow the procedure below (except if you selected JPEG as a file format).
1
If there are additional pages of originals to be scanned, place the next original on the platen glass, and
press
.
●
Repeat this step until you finish scanning all of the pages.
●
When there is only one page to be scanned, proceed to the next step.
2
Select <Start TX>.
➠
The e-mails are sent.
●
If you always want to scan with the same settings:
●
If you want to specify the e-mail sender name:
LINKS
Checking Status and Log for Scanned Originals(P. 248)
Scanning
<Yes>.
Canceling Sending Documents(P. 246)
Changing the Default Settings for Functions(P. 154)
<Register Unit Name (E-Mail)>(P. 402)
259