Configuring Ipsec Tunnels - Vocality V200 User Manual

Vocality User Manual
User Manual for V200
Valid for V08_08.02 or V08_48.02
INET-ADDRESS-MIB http://www.simpleweb.org/ietf/mibs/modules/IETF/txt/INET-
ADDRESS-MIB
IANA-RTPROTO-MIB http://www.simpleweb.org/ietf/mibs/modules/IANA/txt/IANA-
RTPROTO-MIB or http://www.iana.org/assignments/ianaiprouteprotocol-mib
These files need to be loaded into Castlerock in this order.
To view the IP routing table within Castlerock you would then select SNMP Mibs >
mgmt > ipForward > ipCidrRouteTable, as shown in Figure 5-24 .
Figure 5-24 Castlerock showing IP Route Table
Figure 5-25 shows more clearly what you will see in that main window. The next hop
addresses of 0.0.0.10, 0.0.0.12 etc are the IP tributary virtual channels of 0:10, 0:12 and
so on.
Figure 5-25 Detailed IP Route Table
5.10

‡Configuring IPSec tunnels

Page 64 of 114