Creating An Ipsec Tunnel With Ike - Vocality V200 User Manual

Vocality User Manual
User Manual for V200
Valid for V08_08.02 or V08_48.02
Step 5
Finally, go to ‡Tunnelling Policies > IPSec Tunnel Policy menu (see Figure 5-29 ).
Set SourceAddr to one of your local address names, assigned in Step 3 or 'ANY'.
Set DestAddr to one of your target address names, assigned in Step 4 or 'ANY'.
Set Tunnel to your tunnel SA name, assigned in Step 2 .
Figure 5-29 IPSec > Tunnelling Policies > IPSec Tunnel Policy
Refer to the Menus appendix for details of all the parameters that can be set.
5.10.2.2

Creating an IPSec tunnel with IKE

Step 1
First, go to the ‡IP > IPSec > IKE Server menu and set the STATE field to 'Enabled'. Set
SOURCE INTERFACE to the address used to identify the unit.
Figure 5-30 IPSec > IKE Server menu
Refer to the Menus appendix for details of all the parameters that can be set.
Page 68 of 114