Getting Started - Vocality V200 User Manual

5

Getting started

The following pages show how to carry out some of the most common tasks on your
unit:
5.1 Capturing and loading configurations
5.2 Upgrading your software - via menus
5.3 Upgrading Boot ROM Firmware
5.4 Renewing your software maintenance licence key
5.5 Installing the Vocality Network Upgrade Tool (VNUT)
5.6 Issuing TTY commands
5.7 Issuing debug commands
5.8 Managing your unit from Linux
5.9 Configuring SNMP
5.10 ‡Configuring IPSec tunnels
5.11 ‡Configuring SSH
5.12 TCP optimisation
5.13 Configuring IP aggregates
5.14 Setting up clocking for serial ports
5.15 Setting clocks on the Digital Voice card
5.16 Back-to-back testing
5.17 Using static routes
5.18 Use with satellite modems
5.19 DHCP server/relay
5.20 Configuring broadcast services
If your task is not in this list, please consult our current set of Application Notes, at
www.vocality.com under 'Documentation'. Application Notes are produced, as a
supplement to existing User Manuals, whenever a common difficulty is identified by our
support teams. Should you have queries which are not answered by our current
documentation, your local Vocality support team would be happy to hear from you. E-
mail support@vocality.com.
Vocality User Manual
User Manual for V200
Valid for V08_08.02 or V08_48.02
Page 36 of 114
37
39
42
43
45
55
56
59
62
64
70
72
74
77
83
85
89
92
97
100