Vocality Routing Settings - Vocality V200 User Manual

Vocality User Manual
User Manual for V200
Valid for V08_08.02 or V08_48.02
Figure 5-74 shows the voice settings on node 1. Voice channel 1 is configured to
transmit as broadcast channel 1 and receive broadcast channel 0 . The other remotes
need to be configured in a similar way but Node 2 will transmit on broadcast channel 2
and Node 3 on broadcast channel 3.

5.20.4 Vocality routing settings

In order to route the broadcast transmission down the correct aggregate(s) you need to
configure the Call Routing > Broadcast Trib Routing menu.
Aggregate destinations for broadcast trib traffic are now configured in a dedicated
menu (the Broadcast Trib Routing menu) and have a dedicated configuration. There is
one configuration for each node (it is not configured on a per-slot basis). There is one
aggregate broadcast group configured for each broadcast highway, plus a default
group.
The configuration for each aggregate broadcast group comprises:
Page 102 of 114
Figure 5-73 Voice menu settings - Node 0
Figure 5-74 Voice menu settings - Node 1