Vocality User Manual
User Manual for V200
Valid for V08_08.02 or V08_48.02
5.10.2.1
Creating an IPSec tunnel with pre-shared keys
Step 1
First, go to the ‡IP > IPSec > Keys menu and select <ADD KEY>. Assign a name to the
description field and then enter a pre-shared key. This key has to be entered twice, for
confirmation.
Figure 5-26 IPSec Keys menu
Step 2
Then go to the ‡IP > IPSec > Tunnel Security Associations menu and select <ADD
SA>. Assign a name to the description field and change MODE to MANUAL.
Enter the IPSec tunnel peer address in the PEER ADDRESS field.
Select the SOURCE INTERFACE that has the IP address used to identify this unit.
For all KEY fields select the named key created in Step 1 .
Page 66 of 114