Logging In From Ssh - Vocality V200 User Manual

the slot number is included in the password prompt for a slot other than Slot 0.

For example:
Enter username for V150 Slot 1:
there is no user account log for slots other than Slot 0.

Accounts are enabled if there is at least one account configured which has:
administrator access rights; and

has had a password configured.

Password entry is in a conventional format, with the entry being asterisked out and
password setting requiring re-entry for confirmation. The password is case-sensitive.
If you forget your configured password there is a backdoor mechanism to get you back
in. This backdoor is the Superuser password - it is unique for each unit, and consists of
an encrypted key based on the serial number. Once entered, the user is given
Administrator privileges to allow him/her to change the password of any other account.
A Superuser password can only be supplied by contacting your local Vocality support
team.
Please be prepared to supply your name, company name and the serial number of the
unit. For security purposes this backdoor may be disabled by disabling
FORGOTTEN PASSWORD RECOVERY in the Users > User General menu.
If you are prepared to lose your configuration information, you can alternatively Factory
Default by entering <CTRL>rrr on the M&C or console port whilst the unit is booting
Status Unit Response Access rights
User None Full access to menus, terminal and debug mode
accounts not
enabled
RO Prompt for Can change own password. Full access to menus but no configurations can be
username and changed (on the web interface a RO user will not be prompted to Save Validated
password Changes) – no access to terminal and debug modes.
RW Prompt for Can change own password. Full access to menus, terminal and debug mode, but
username and changes cannot be saved to the menus: Users > User General menu, Users
password > User Accounts menu, ‡SSH Server menu, ‡IP > IPSec menu, Configurations
menu (since it can result in change of IPSec config)
Admin Prompt for Can create or delete user accounts and change password for any user. Full
username and access to menus, terminal and debug mode. Can carry out factory reset.
password
4.3.2

Logging in from SSH

The feature is only available in the secure variant of software.
Vocality User Manual
User Manual for V200
Valid for V08_08.02 or V08_48.02
Table 4-5 Summary of user access rights
Page 31 of 114